Poultry Bucket Feeder - Parts

This is really just one set of parts that have been reconfigured and installed in a 4-gallon container.

Poultry bucket feeder part

We've created a step-by-step set of images to walk you through the process of building your own feeder with the parts you see in the image.

Basic step-by-step images to make your own poultry bucket feeder. Use your bucket and our fittings.


Poultry bucket feeder 2 holes 2 sided Poultry Bucket Feeder


Poultry bucket feeder 2 holes 1 side Poultry Bucket Feeder


Poultry bucket feeder for ducks Yes, even ducks can use this bucket feeder!

Poultry bucket feeder - drill hole for elblow

  • The bottom edge of the drill bit should be about 1.5 to 2 inches up from the floor of the poultry feeder bucket.

  • The ideal hole size is 3.75 inches. Some folks are using a 4-inch hole saw to cut their hole. If you cut a 4-inch hole, you must make sure you center the elbow in that hole!
Poultry bucket feeder - mark the holes in the elbow flange

  • Place the elbow through the hole and make sure the elbow is facing down towards the bottom of the poultry feeder bucket.
  • Make sure you are centered in the big hole.
  • Drill just 2 small pilot holes.
  • Put screws in the 2 holes and tighten.
  • Drill the balance of the pilot holes and install the rest of the screws.
Poultry bucket feeder - install Weather Guard

  • Weather Guard is a tight friction fit. No glue or screws necessary.
Poultry bucket feeder - install Weather Guard

  • Fill with feed and call your flock over and introduce them to their new poultry feeder.

Poultry bucket feeder -cut away viewPoultry Feeder Cut away view



We have developed a great site for this backyard poultry feeder and many other poultry related items. Follow this link to MuddyHillFarm.com



Made in the AU

Save the Baby Raindrop Logo
View Cart
Related Products at MisterArt.com

Krylon Fusion
Spray Paint
for Plastics
Up to 75% off art & craft supplies at MisterArt

Related Products at
Amazon.com: