Warning:
Aquabarrel.com requires the use of Javascript to view the website, please use a modern web browser with Javascript enabled for viewing.

Downspout Diverter Dam for Rectangular Downspouts

Divert rain water to your container with this rubber diverter dam

	Key Features: Install without disassembling your downspout - just drill one hole into the downspout Flexi-Fit downspout diverter catches water as it comes down the downspout and sends it to the barrel When the rain barrel is full the water does not enter the barrel it continues down the downspout Kit includes the drill bits for the proper size holes to be cut into the downspout and your container One kit fits both 2x3 and 3x4 Rectangular Downspouts Note: Rain Barrel container NOT included on with this Kit.
	Rectangular Diverter Dam (for both 2x3 and 3x4 downspouts) Include: Diverter Dam Winter Cover Plate Threaded Seal (2) Drain Assembly Spigot - Shut Off Hose Seal (2) 3pc Hole Saw Set Fill Hose Screws Instructions Do Not Drink Sticker
	This is a parts kit that is very similar to the kit used in our 60 RainStation Rain Barrel. You supply the container and we supply nearly everything you need to bring the rainwater from the downspout over to your container. Note: Rain Barrel container NOT included on with this Kit.


	This is a great image of the Flexi-Fit Diverter in place, inside of a section of 2x3 downspout. Once the water level in the container reaches the same level as the diverter, the water spills over into the middle of the diverter and continues down the downspout. IF you have a lot of debris coming down that might clog the diverter, we suggest you install a downspout filter above it. Note: Downspouts and Downspout Filters are NOT included with this Kit.